[waynemcl]

I put foil under the board, as mentioned above, but that alone didn’t do the trick for mine.

I had to tweak a few R values differently; ended up with these:
R1 from 470k to 660k (330k + 330k series)
R5 from 560k to 820k
R8 from 560k to 820k
R11 from 750k got 2.4M in parallel (1.2M + 1.2M, so about 570k total).

Hope this helps the next tinkerer.
Cheers 🙂

[waynemcl]

Hiya, Source code seems to have fallen off, I would like to see if I could tweak the capacitance sensing 🙂
Thanks, cheers, W

[Author]

Posts