Zeppelin Design Labs

EQ problems

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #16764 Reply
    FreddyFuFu
    Participant

    Hi,

    When I engage my pedal, the tone of the guitar changes drastically and I lose the mid/high frequencies.

    Do I have to re-adjust the trim pots?

    Best regards,

    #16819 Reply
    brach
    Moderator

    By your symptoms, i’m assuming you have an older version of the Quaverato, which had a relatively low input impedance. Try putting a buffer pedal before the Quaverato…basically any non-true bypass pedal should work…even a Boss pedal that’s not engaged. That should help dive your Quaverato better. Alternatively, you can adjust your tone trim pots to your taste while it is in your pedal board. This may be a better option if you don’t want to put a buffer pedal before it.
    -Brach

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: EQ problems
Your information:




avant-garde audio & electronic products