Jumper pad bypassing

Home Forums Quaverato Forum Quaverato FAQ & Support Jumper pad bypassing

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #28252 Reply
    Bill G

    I’m bypassing the jumper pads since I managed to mess them up. I can see TP1 and TP3 go to pins 14 and 1 on U2. Looks like TP2 and 4 go to R4 and R5? If so, which side of the resistor do I connect to? I already soldered them to the right side. I’d like to know if that’s correct before I put everything back together. Thanks

    #28253 Reply
    Bill G

    I found my answer in the trouble shooting manual ( I’m getting old lol) Thanks for your time and by the way..Great kit! Please keep more coming.

    #28255 Reply

    Ok…I’m glad you found it!
    Good luck!

Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: Jumper pad bypassing
Your information: