Zeppelin Design Labs

Macchiato Resistor Values

Home Forums Macchiato Mini Synth Forum Macchiato FAQ & Support Macchiato Resistor Values

This topic contains 2 replies, has 2 voices, and was last updated by  zdlAdmin 2 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1880 Reply

    Michael

    The Macchiato Mini Synth kit has two resistor pads (R4 above the D#/Eb key and R11 above the A#/Bb key) marked 820k, but the kit does not include any 820k resistors. The kit does however have two extra 750k resistors.

    Can the extra 750k resistors be used for R4 and R11, or do they need to be 820k as marked?

    #1886 Reply

    Roger

    The instructions read that the Silk Screen printing on the Circuit board is from an earlier version, and to use the Circuit Board layout in the instructions which show correct values. The R4 and R11 resistors are 750k.

    #1958 Reply

    zdlAdmin
    Keymaster

    Roger is correct. Thanks, bud.

Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: Macchiato Resistor Values
Your information:




avant-garde audio & electronic products