VPM-1 Volume Pedal Mod for Ernie Ball Volume Pedals
Select Options Below for Price
Upgrade your Ernie Ball volume pedal with the “mother of all volume pedal mods!”
- No strings to break or potentiometers to get dirty
- A powerful magnet and a Hall effect sensor detect treadle movement
- Pure analog signal path
- Choose from 5 different volume taper curves, or customize your own
- Add up to 14dB gain
- Stereo Upgrade adds traditional and panning stereo modes
- Expression Upgrade allows you to control almost any pedal with an expression input
Choose from these build options:
- DIY KIT Build your own mod from scratch. Soldering required — not recommended for beginners!
- READY TO INSTALL: Mod is fully assembled and ready for you to install in your Ernie Ball volume pedal with just a few basic tools. No soldering required.
- FULL SERVICE: Ship us your pedal — we will mod it for you and return it ready-to-play.
Robert Cooper –
I love it! I did the mod kit installation yesterday. This was my first attempt at doing any through-hole soldering project and it went really well considering my lack of experience. I plugged it in and it works flawlessly. I run the pedal after my drives and before my modulation and delay. My tone stays exactly the same ant any volume level and the boost gives my signal a little kick in the pants before heading down the road. Great kit!
Glenn (verified owner) –
I’ve been searching for the perfect volume pedal and it’s been a struggle. BUT NOW my search is over. Enter the VPM-1 mod. All I have to say is that the implementation behind this design is nothing short of genius. There is no shortage of attention to detail. I love the fact there is no string and 5 sweep options with saving your favorite??? Yes please! The pedal goes in front of my signal chain immediately into a Truetone Route 66 and there is ZERO tone suck/loss throughout the rest of my chain (Flyrig v2 as the core). Oh and I forgot to mention the extra 14db gain knob (crazy). The manual says to use caution (’cause you’ll probably overload your board or amp, ha!). The whole team at Zeppelin should be applauded, especially during this COVID-19 situation. Thank you to Glen, and Brock and anyone else that delivered such an amazing product! Stay well!
Dave Reinisch (verified owner) –
For anyone on the fence about getting this don’t hesitate! I did the self install. Outstanding customer service. Awesome product. No more strings. Custom calibrate the sweep. Don’t toss your busted VP Jr. and bring it back to life. It’s a no brainer . Thanks guys. A+++++
dlsmusic –
I love my new VPM-1! I purchased the kit. The build instructions are extremely clear. The circuit worked flawlessly upon powering up. The calibration is a breeze. The pedal mod has significantly improved my tone as compared to the original pedal. I didn’t realize how much it was sucking the life out of my tone. The VPM-1 dramatically improved my sound. I couldn’t recommend this pedal mod enough! Count me in as a ZPL fan!
Richie B (verified owner) –
Beautiful! I used my Morley for quite, but never liked or got used to the taper, used my VP Jr for live and lived with the less than stellar performance. After an hour and a half with the VPM-1 I am floored, great sound, the build was a gas and the instructions were perfect. Fan for life, nice work!
Travis (verified owner) –
5-star level awesome product. Hands down the most versatile volume pedal out there, and also the smoothest operator! When you take the built-like-a-tank aluminum chassis of the VP Jr and put these seriously engineered electronics in there, you get the best volume pedal out there in my humble opinion.
I bought the DIY kit with all the options and put it all together in Jan 2021. I get by with a soldering iron but I’m no expert. While I guess it was not a “beginner” level project, it was certainly within reach of most people who have basic soldering skills. The instructions are very thorough and leave nothing to the imagination. I had a blast putting it together.
Even if you don’t have an Ernie Ball VP Jr laying around – go and find a used one just to do this project! Other volume pedals with similar functionality are 3 times the price,
Albert Lekstutis (verified owner) –
I completed this project with the stereo upgrade. Fantastic upgrade from my Ernie Ball 6165 which was an all metal stereo volume/pan pedal I wore out into an irreparable mass of crackles and pops. In contrast the VPM-1 It is smooth and transparent. It seamlessly moves my guitars signal between two different effects loops. The instructions are very thorough and complete. The customer service is excellent. Wait no longer to buy it. The VPM-1 is the volume pedal you are looking for! Get it full service if you want to save the time building for making music, but don’t hesitate to buy one.
I look forward to handing this pedal down through the generations.
Dylan Saliba (verified owner) –
Wow! What an amazing engineering job! The tolerances on the DIY kit are tight but on point. Everything is tiny and crammed in there but it all fits and works like a dream! I had missing parts but John got replacements to me in a timely manner. I love when things just work like they’re supposed to the first time. The instructions were rock solid with good pictures for us cave men.
Steve Janosko (verified owner) –
Fantastic fix and upgrade for my vp jr. Have replaced the string and adjusted the original potentiometer numerous times and am thrilled to never worry about that again. Install of pre-fabricated unit was quick and easy, instructions are very good. Am very happy with the operation and output, and quality of the signal; cleaned up my signal and gives me multiple choices of pedal sweep. Excellent design and quality. If you like the sturdy construction of your Ernie Ball but are looking for an upgrade, this is the best out there!