Quaverato seems to be stuck in reflash loop

Home › Forums › Quaverato Forum › Quaverato FAQ & Support › Quaverato seems to be stuck in reflash loop

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 5, 2025 at 9:29 am #43166 Reply
    Pat
    Guest

    My Quaverato is stuck blinking 2–4–3 every boot. I confirmed Pin 12 logic is fine, but it never toggles the relay. I troubleshooted GPT and it suspected EEPROM corruption.

    Is there any way to reflash the microcontroller or am I barking up the wrong tree?

    April 5, 2025 at 11:37 am #43167 Reply
    brach
    Moderator

    You are barking up the wrong tree. Never trust chatGPT for custom products. Trust the manufacture’s troubleshooting guide instead!
    Read step 3-B of the Quaverato troubleshooting guide. Let me know if it’s not a short.
    Good luck.
    -Brach

    April 5, 2025 at 4:16 pm #43168 Reply
    Pat
    Guest

    Just emailed as well but confirmed no short!

    April 5, 2025 at 4:16 pm #43169 Reply
    Pat
    Guest

    Just emailed as well but confirmed no short!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: Reply #43168 in Quaverato seems to be stuck in reflash loop
Your information: